|
|
|
Ezi
System Cable
& Pipe Detection |
|
|
|
|
|
|
 |
EziCat 100 Cable
Avoidance Tool
It detects alternating
(AC) electromagnetic signals radiated due to
currents flowing in conductive buried services.
The operator is given
the location and direction of the underground
service when the unit receives reradiated radio
frequencies through internal aerials, which detect
the strength and direction of the received signals.
There are several vital
safety features are built into the EziCAT 100 rarely
found in other cable avoidance tools.
- Always switches on
in POWER mode for maximum safety
- Starts with maximum
sensitivity for safe operation
- Fully automatic
pinpointing for quick and accurate location of the
relevant service without the need for any awkward
adjustment by the operator
- Pictographic
quick-guide instructions are displayed on the side
of the locator for easy on-site reference
- In-built, user
activated, self-test function, which tests both the
hardware and software to ensure full functionality
of the unit
- Audio visual display
with simple LED indicators for maximum convenience
- Perfectly balanced
on / off trigger
- Robust, compact and
lightweight case
- 8 and 33 kHz tracing
modes for on-site flexibility
- Low battery warning
indication
- Operates with a wide
range of signal generators
- Dust and water
protection to IP 54
|
|
|
|
 |
EziCat 200 Cable
Avoidance Tool
The EziCAT 200 unit is used
for the avoidance and location of cables and pipes
buried in the ground with the added benefit of depth
estimation in cooperation with the EziTRACE or the Sonde
in 33kHz mode.
Like the EziCAT 100, the
EziCAT 200 unit detects alternating (AC) electromagnetic
signals radiated due to currents flowing in conductive
buried services. The operator is given the location and
direction of the underground service when the unit
receives reradiated radio frequencies through internal
aerials, which detect the strength and direction of the
received signals.
Several vital safety
features are built into the EziCAT 200.
- Always switches on
in POWER mode for maximum safety -
-
Starts with maximum
sensitivity for safe operation
-
Fully automatic
pinpointing for quick and accurate location of
the relevant service without the need for any
awkward adjustment by the operator
- In-built, user
activated, self-test function, which tests both the
hardware and software to ensure full functionality
of the unit
- Perfectly balanced
on / off trigger
- Robust, compact and
lightweight case
- Measure Line and
Sonde depth to 3 metres
- Pictographic
quick-guide instructions are displayed on the side
of the locator for easy on-site reference
-
Audio visual display
with simple LED indicators for maximum
convenience
-
accuracy of approx.
± 10% when using cable depth (measurements to
the centre of the pipe or cable detected)
- 8 and 33 kHz tracing
modes for on-site flexibility
- Low battery warning
indication
- Adaptive Meter scale
and audio response
- Digital
microprocessor control
- Operates with an
EziTRACE signal generator
- Network Rail
approved (Certificat No: PA05/02031)
|
|
|
 |
EziTrace
8/33 Signal Generator
The EziTRACE
generates a specific "active" signal that can then be
traced using the EziCAT 100.
-
Choice
of frequencies for maximum site flexibility
-
Induction and connection output modes
-
Rugged
sealed case for durability
-
Operates
with a wide range of location equipment
-
Supplied
with crocodile connection cable set and earth spike,
six AA batteries, user manual and certificate of
conformity
-
Variable
output level
-
Battery
and output level indicators
-
Automatic mode selection (connection / induction)
-
Digital
microprocessor control
-
Compatible with all EziSYSTEM accessories
-
Network
Rail approved (PADS No: 094/020052)
|
|
|
 |
EziRod - 30m Trace
The EziROD is connected to
the EziTRACE and inserted and pushed along the service
under investigation. Using the EziCAT to locate it on
the surface, you can
trace pipes which do not produce their own current and
which you are unable to
induce a signal into. |
Buy a Sonde with the EziRod and SAVE £20.00
|
|
 |
Sonde 40mm
The
EziSYSTEM Sonde is a small battery powered transmitter,
which can be connected to a simple drain rod system. The
signals are used to indicate the position when inserted
into an underground service such as a drain, duct, pipe
or sewer. It can also be attached to other moving
objects such as boring tools or cameras. |
|
|
|
|
|
|
|
|
|
|
|
|
|
We can supply all major
brands so if you don't see what you
want, please ask us to quote for an alternative item for
you using the
Source and Supply form here.
|
|
|
|
|
|
|
|
|
|
|
