|
|
|
Moisture Meters |
|
|
|
|
|
|
|
|
 |
ETI Moisture Meter
Impact-resistant ABS case with 70mm x
20mm LCD display
Measures the electrical resistance and
converts it to display % moisture content
Full Specification |
£59.00
reduced to £51.00
|
|
 |
Protimeter Mini
These
compact, general purpose moisture meters are used by
building professionals and trades across the globe to
check the moisture level of wood and masonry products
for a vast range of quality control and dampness
diagnosis applications.
Full Specification |
£127.00
reduced to £115.00
|
|
 |
Ball Moisture Meter
Electronic structural moisture indicator using a
patented technique based on the dielectric constant/
high frequency method. The indicator is equipped with a
digital LCD readout and a universally applicable ball
sensor for non-destructive location of moisture
concentration in all kinds of building materials as well
as for assessment of moisture distribution in walls,
floors and ceilings.
Full Specification |
£129.00
reduced to £99.99 |
|
|
 |
MEP - Moisture Encounter
Plus
The Moisture Encounter
PLUS is the fully upgraded replacement version of the
world’s most popular and successful non-destructive
moisture meter the Moisture Encounter.
The Moisture Encounter
PLUS incorporates all the features and benefits found in
the original Moisture Encounter
Full Specification |
£279.00
reduced to £257.00 |
|
 |
Protimeter Surveymaster
The new Surveymaster is
easier to use and gives more information than its
predecessor.
It incorporates two modes of operation, Search and
Measure that enable the user to distinguish surface
moisture from sub-surface moisture, essential
information when trying to establish the extent and
cause of a dampness problem.
Full Specification |
£322.00
reduced to £295.00 |
|
 |
CME 4 - Concrete
Moisture Encounter 4
To use, simply switch on
and hold the instrument firmly against the surface. As
many non-destructive tests as you need can be carried
out in seconds without the need to drill or damage the
concrete.
Full Specification |
£325.00
reduced to £295.00 |
|
 |
MRH -
Tramex Digital Meter
A pocket
size non-destructive digital display moisture meter for
measuring the % moisture content in wood and comparative
readings in other building materials. It incorporates a
switchable specific gravity adjustment for most wood
species, plus it provides relative readings deep into
most building materials. such as Drywall, Roofing,
Brick, Ceramic tile etc.
Full Specification |
£325.00
reduced to £285.00 |
|
|
 |
MRH-Kit - Tramex
Complete Moisture and Humidity Meter
A pocket size
non-destructive digital display moisture meter for
measuring percentage moisture content in wood
incorporating a switchable specific gravity adjustment
for most wood species. It provides relative/comparative
readings deep into most building materials such as
Dry-wall, Roofing, Brick, Ceramic tile etc. The MRH also
has the additional option of a Hygrometer mode to
measure Relative Humidity, Temperature, Dew Point
Temperature and Grains/lb. by simply plugging in a
Tramex Relative Humidity Probe.
Full Specification
|
£525.00
reduced to £489.00
|
|
|
CMEX-KIT3 -
Tramex CMEXpert Kit
A pocket size
non-destructive digital display moisture meter for
measuring percentage moisture content in concrete and
comparative readings in other floor screeds. The
Concrete Encounter CMEXpert is a digital version of the
Tramex Concrete Encounter CME4 hand-held electronic
impedance moisture meter. It has 4 scales: Concrete,
Gypsum, CM Equivalent and a Reference scale. To carry
out moisture tests simply brush any dust from a smooth
area of concrete and also from electrodes, switch on the
CMEX, press it down on the surface to read the
percentage moisture content in the concrete slab.
There’s absolutely no surface damage and no waiting.
Full Specification |
£545.00
reduced to £515.00
|
|
|
RWS - Tramex Roof and
Wall Moisture Scanner
A multi-mode hand held
moisture detection instrument for non-destructive
moisture scanning, surveying, and leak tracing in the
building envelope, including built up, non-conductive
single ply membranes, modified and foam roofing systems
and EIFS (Exterior Insulation Finishing Systems).
Full Specification |
£745.00
reduced to £695.00
|
|
 |
Protimeter Speedy Moisture Meter
The Speedy tester
is a portable system comprising a vessel with an
integral pressure gauge, a weighing scale and a carry
case.
A small sample of the material is prepared, weighed and
placed into the vessel. A reagent is then added and the
vessel is sealed and shaken to mix the reagent with the
sample.
Free moisture within the sample reacts with the reagent
to produce a gas and pressure rise within the vessel
that is proportional to the amount of moisture. The
moisture content value is then read directly form the
calibrated pressure gauge.
All the component parts of
the Speedy 2000 series have been selected for their
quality, functionality and durability for use in
demanding field or site locations.
Full Specification |
£649.00
reduced to £629.00
|
|
|
 |
Speedy Reagent
This 600g tin of
Calcium Reagent is for use with the Speedy range of
moisture measurement pressure vessels.
The calcium carbide reagent used with the Speedy tester
is a hazardous product that must be handled with care by
the user and with consideration for the environment.
Full Specification and Special
Handling Instructions |
£36.99
per tin |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
