 |
Protimeter Surveymaster
The new Surveymaster is
easier to use and gives more information than its
predecessor.
It incorporates two modes of operation, Search and
Measure that enable the user to distinguish surface
moisture from sub-surface moisture, essential
information when trying to establish the extent and
cause of a dampness problem.
|
£322.00
reduced to
Carriage
£6.99 to UK Mainland
|
Modes of operation:
Search Mode - Non-Invasive
The
search mode is used to assess the moisture beneath the
surface of solid walls and floors independently of
surface conditions. The nominal depth of measurement is
3/4 in (19 mm) this depends on density and other
characteristics of the material. When against the
surface, as shown below, the instrument transmits a
signal into the material. The relative level is shown on
the digital display and its moisture condition is shown
on the accompanying scale of color-coded lights. This
measurement presentation the user to:
Look for moisture behind wall and floor coverings, such
as tile and vinyl
Assess, in relative terms, if the material is in a dry,borderline or damp condition
Map the extent of the problem numerically
Non-invasive pinless radio frequency finds moisture
depth where moisture is not
always directly visible to 3/4 in (25.4 mm) below the
surface
This mode of measurement is not adversely affected by
the presence of surface moisture
Applications:
Shower pans, behind ceramic tile, fine finishes, water
stains, tile and vinyl
floor coverings, around toilets, drywall, below grade
floors and walls, plaster,
masonry, concrete and concrete block
Measure Mode
This mode
is used to measure the moisture level at the surface and
at incremental depth, when used with the auxiliary deep
wall probes. Measure mode readings are precise and
specific to the immediate area of contact of the
electrodes. The actual moisture content of wood is shown
on the digital display with the corresponding moisture
condition shown on the accompanying scale of color-coded
lights. Wood Moisture Equivalent (WME) values are shown
for other non-conductive, porous building materials.
Pin-type probes measure moisture in wood and other
building materials
(use provided calibration chart for more precise
readings)
Deep wall probes establish the presence of moisture in
wall cavity insulation,
sub and surface structures Options
Exterior Insulation and Finished Systems (EIFS) probe
finds moisture in
exterior insulation finishing systems
Hammer electrode for wood floor applications
Applications:
Wood and wood floors, drywall, concrete and concrete
block, stucco, plaster, masonry and EIFS
Features:
Two modes of operation to distinguish surface moisture
from sub surface moisture
Color coded scale for simple classification of dry,
borderline or damp conditions
Digital display for precise measurement to facilitate
accurate dampness measurement
Extension lead for measurements in difficult to reach
areas and deep wall probes.
Includes:
1no. Protimeter Surveymaster SM (new)
1no. Protective Pouch
2no. AA Batteries
1no. Set of 120mm Deep Wall Probes
1no. Heavy Duty Extension Lead For Taking Readings In
Awkward Areas
1no. Set of Spare Needles
1no. Self Calibration Check
1no. Wood Species Chart
1no: 24 Month Warranty
|
